cystech electronics corp. spec. no. : c386n6 issued date : 2013.08.19 revised date : 2013.09.06 page no. : 1/9 MTP6405N6 cystek product specification p-channel enhancement mode power mosfet MTP6405N6 bv dss -30v i d -6.5a r dson(max) @v gs =-10v, i d =-5a 24m (typ.) r dson(max) @v gs =-4.5v, i d =-4a 34m (typ.) description the MTP6405N6 is a p-channel enhancement-mode mo sfet, providing the designer with the best combination of fast switching, ruggedized device de sign, low on-resistance and cost effectiveness. the sot-26 package is universally preferred for a ll commercial-industrial surface mount applications. features equivalent circuit ? simple drive requirement MTP6405N6 g gate s source d drain ? low on-resistance ? small package outline ? pb-free lead plating package absolute maximum ratings (ta=25 c) parameter symbol limits unit drain-source voltage v ds -30 gate-source voltage v gs 20 v t c =25 c -8.2 t c =70 c -6.6 t a =25 c (note 1) -6.5 continuous drain current t a =70 c (note 1) i d -5.2 pulsed drain current (note 2, 3) i dm -30 a t c =25 c 3.2 t c =70 c 2.1 t a =25 c 2 total power dissipation t a =70 c p d 1.25 w operating junction temperature and storage temperature range tj, tstg -55~+150 c
cystech electronics corp. spec. no. : c386n6 issued date : 2013.08.19 revised date : 2013.09.06 page no. : 2/9 MTP6405N6 cystek product specification thermal data parameter symbol value unit thermal resistance, junction-to-case, max r th,j-c 39 thermal resistance, junction-to-ambient, max (note 1) r ja 62.5 c/w note : 1.surface mounted on 1 in2 copper pad of fr-4 board, t 5 sec. 156 /w when mounted on minimum copper pad. : 2.pulse width lim ited by maximum junc tion temperature. 3.pulse width 300 s, duty cycle 2% electrical characteristics (ta=25 c, unless otherwise noted) symbol min. typ. max. unit test conditions static bv dss -30 - - v v gs =0, i d =-250 a bv dss / tj - -0.03 - v/ : reference to 25 , i : d =-250 a v gs(th) -0.8 -1.2 -2.5 v v ds =v gs , i d =-250 a i gss - - 100 v gs =20v, v ds =0 - - -100 na v ds =-24v, v gs =0, tj=25 : i dss - - -10 a v ds =-24v, v gs =0, tj=55 : - 24 32 i d =-5a, v gs =-10v *r ds(on) - 34 45 m i d =-4a, v gs =-4.5v *g fs - 16.6 - s v ds =-5v, i d =-5a dynamic ciss - 1316 - coss - 143 - crss - 118 - pf v ds =-15v, v gs =0, f=1mhz t d(on) - 14 - t r - 7 - t d(off) - 50 - t f - 23 - ns v ds =-15v, i d =-1a, v gs =-10v, r g =6 ? qg - 16 - qgs - 4.9 - qgd - 5.2 - nc v ds =-15v, i d =-6.5a, v gs =-10v source-drain diode *i s - - -3.5 *i sm - - -14 a *v sd - -0.75 -1 v i s =-1a,v gs =0v *t rr - 23 - ns q rr - 14 - nc i s =-6.5a,v gs =0v,di/dt=100a/ s *pulse test : pulse width 300 s, duty cycle 2% ordering information device package shipping MTP6405N6-0-t1-g sot-26 (pb-free lead plating an d halogen-free package) 3000 pcs / tape & reel
cystech electronics corp. spec. no. : c386n6 issued date : 2013.08.19 revised date : 2013.09.06 page no. : 3/9 MTP6405N6 cystek product specification typical characteristics typical output characteristics 0 5 10 15 20 25 30 012345 -v ds , drain-source voltage(v) -i d , drain current (a) -v gs =2.5v -v gs =3v 10v,9v,8v,7v,6v,5v -v gs =4v brekdown voltage vs ambient temperature 0.4 0.6 0.8 1 1.2 1.4 -75 -50 -25 0 25 50 75 100 125 150 175 tj, junction temperature(c) -bv dss , normalized drain-source breakdown voltage i d =-250 a, v gs =0v static drain-source on-state resistance vs drain current 10 100 1000 0.01 0.1 1 10 -i d , drain current(a) r ds(on) , static drain-source on-state resistance(m) v gs =-10v v gs =-3v v gs =-4.5v reverse drain current vs source-drain voltage 0.2 0.4 0.6 0.8 1 1.2 024681 -i dr , reverse drain current (a) -v sd , source-drain voltage(v) static drain-source on-state resistance vs gate-source voltage 0 20 40 60 80 100 120 140 160 180 200 024681 0 0 tj=25c tj=150c v gs =0v drain-source on-state resistance vs junction tempearture 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 -60 -20 20 60 100 140 180 tj, junction temperature(c) r ds( on) , normalized static drain- source on-state resistance v gs =-10v, i d =-5a v gs =-4.5v, i d =-4a -v gs , gate-source voltage(v) r ds( on) , static drain-source on- state resistance(m) i d =-5a i d =-4a
cystech electronics corp. spec. no. : c386n6 issued date : 2013.08.19 revised date : 2013.09.06 page no. : 4/9 MTP6405N6 cystek product specification typical characteristics(cont.) capacitance vs drain-to-source voltage 10 100 1000 10000 0.1 1 10 100 -v ds , drain-source voltage(v) capacitance---(pf) c oss ciss crss threshold voltage vs junction tempearture 0.4 0.6 0.8 1 1.2 1.4 -75 -50 -25 0 25 50 75 100 125 150 175 tj, junction temperature(c) -v gs( th) , normalized threshold voltage i d =-250 a forward transfer admittance vs drain current 0.01 0.1 1 10 0.001 0.01 0.1 1 10 -i d , drain current(a) g fs , forward transfer admittance-(s) pulsed ta=25c v ds =-10v v ds =-5v gate charge characteristics 0 2 4 6 8 10 048121620 qg, total gate charge(nc) -v gs , gate-source voltage(v) i d =-6.5a v ds =-24v v ds =-15v v ds =-10v maximum safe operating area 0.01 0.1 1 10 100 0.01 0.1 1 10 100 -v ds , drain-source voltage(v) -i d , drain current (a) dc 10ms 100ms 1ms 100 s t a =25c, tj=150c r ja =62.5c/w, v gs =-10v single pulse 1s r ds( on) limit maximum drain current vs casetemperature 0 2 4 6 8 10 25 50 75 100 125 150 175 t c , case temperature(c) i d , maximum drain current(a) v gs =-10v, r ja =32c/w
cystech electronics corp. spec. no. : c386n6 issued date : 2013.08.19 revised date : 2013.09.06 page no. : 5/9 MTP6405N6 cystek product specification typical characteristics(cont.) typical transfer characteristics 0 5 10 15 20 25 30 012345 -v gs , gate-source voltage(v) -i d , drain current(a) v ds =-10v single pulse maximum power dissipation 0 100 200 300 400 500 600 700 800 900 1000 0.0001 0.001 0.01 0.1 1 10 100 1000 pulse width(s) peak transient power (w) t j(max) =150c t a =25c ja =62.5c/w power derating curve 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 2.2 0 20 40 60 80 100 120 140 160 t a , ambient temperature() p d , power dissipation(w) mounted on fr-4 board with 1 in 2 p ad area power derating curve 0 0.4 0.8 1.2 1.6 2 2.4 2.8 3.2 3.6 4 0 20 40 60 80 100 120 140 160 t c , case temperature() p d , power dissipation(w) transient thermal response curves 0.001 0.01 0.1 1 1.e-04 1.e-03 1.e-02 1.e-01 1.e+00 1.e+01 1.e+02 1.e+03 t 1 , square wave pulse duration(s) r(t), normalized effectivetransient thermal resistance single pulse 0.01 0.02 0.05 0.1 0. 2 d=0.5 1.r ja (t)=r(t)*r ja 2.duty factor, d=t 1 /t 2 3.t jm -t a =p dm *r ja (t) 4.r ja =62.5 c/w
cystech electronics corp. spec. no. : c386n6 issued date : 2013.08.19 revised date : 2013.09.06 page no. : 6/9 MTP6405N6 cystek product specification recommended soldering footprint
cystech electronics corp. spec. no. : c386n6 issued date : 2013.08.19 revised date : 2013.09.06 page no. : 7/9 MTP6405N6 cystek product specification reel dimension carrier tape dimension
cystech electronics corp. spec. no. : c386n6 issued date : 2013.08.19 revised date : 2013.09.06 page no. : 8/9 MTP6405N6 cystek product specification recommended wave soldering condition product peak temperature soldering time pb-free devices 260 +0/-5 c 5 +1/-1 seconds recommended temperature profile for ir reflow profile feature sn-pb eutectic assembly pb-free assembly average ramp-up rate (tsmax to tp) 3 c/second max. 3 c/second max. preheat ? temperature min(t s min) ? temperature max(t s max) ? time(ts min to ts max ) 100 c 150 c 60-120 seconds 150 c 200 c 60-180 seconds time maintained above: ? temperature (t l ) ? time (t l ) 183 c 60-150 seconds 217 c 60-150 seconds peak temperature(t p ) 240 +0/-5 c 260 +0/-5 c time within 5 c of actual peak temperature(tp) 10-30 seconds 20-40 seconds ramp down rate 6 c/second max. 6 c/second max. time 25 c to peak temperature 6 minutes max. 8 minutes max. note : all temperatures refer to topside of t he package, measured on the package body surface.
cystech electronics corp. spec. no. : c386n6 issued date : 2013.08.19 revised date : 2013.09.06 page no. : 9/9 MTP6405N6 cystek product specification sot-26 dimension marking: millimeters inches millimeters inches dim min. max. min. max. dim min. max. min. max. a 1.050 1.250 0.041 0.049 e 1.500 1.700 0.059 0.067 a1 0.000 0.100 0.000 0.004 e1 2.650 2.950 0.104 0.116 a2 1.050 1.150 0.041 0.045 e 0.950 (bsc) 0.037 (bsc) b 0.300 0.500 0.012 0.020 e1 1.800 2.000 0.071 0.079 c 0.100 0.200 0.004 0.008 l 0.300 0.600 0.012 0.024 d 2.820 3.020 0.111 0.119 0 8 0 8 notes : 1.controlling dimension : millimeters. 2.maximum lead thickness includes lead finish thickness, and minimum lead thickness is the minimum thickness of base material. 3.if there is any question with packing specification or packing method, please c ontact your local cystek sales office. material : ? lead : pure tin plated. ? mold compound : epoxy resin family, flammability solid burning class:ul94v-0. important notice: ? all rights are reserved. reproduction in whole or in part is prohibited without the prior written approval of cystek. ? cystek reserves the right to make changes to its products without notice. ? cystek semiconductor products are not warranted to be suitable for use in life-support applications, or systems. ? cystek assumes no liability for any consequence of customer pr oduct design, infringement of pat ents, or application assistance . 6-lead sot-26 plastic surface mounted package cystek package code: n6 style: pin 1. drain (d) pin 2. drain (d) pin 3. gate (g) pin 4. source (s) pin 5. drain (d) pin 6. drain ( d ) 6405 ???? device name date code ? ?
|
